Product Name : WB UV Varnish
Product No : WUV-188
Product Description

Description

WUV-188 is a new type of water-based ultraviolet light hardening varnish developed by M.create. Its main component is made of water-based acrylic synthetic resin by special polymer structure design and high-tech process. It is the most environmental friendly UV hardening varnishing product.

Description

WUV-188 is a new type of water-based ultraviolet light hardening varnish developed by M.create. Its main component is made of water-based acrylic synthetic resin by special polymer structure design and high-tech process. It is the most environmental friendly UV hardening varnishing product.

 

Characteristics

  1. This product is water-soluble. WUV-188 can be deluted and cleaned by water. 
  2. Do not require organic solvents. Extremly low VOC emissions to meet environmental needs.
  3. Very low odor, extremly low irritation and do not harm the body.
  4. High-tech water-based synthetic resin, curing speed will not slow down because of water molecules.
  5. Same as general solvent-based ultraviolet light hardening varnish, do not requir to change the conditions and the structure of the machine. After UV light curing, causes water resistance protective layer as well.
  6. The print after applying WUV-188 shows high gloss, high wear-resistant, non-explosive line, more performance with tape testing.

Specification

Appearance / Color White emulsion liquid
Viscosity; 30% aqueous solution (25oC, Brookfield #2) 400±50 cps(mPa.s)
Gloss 60o 85~90
Main components Water-Based Acrylic resins
Assistant components Initiator, Additive

 

Application

  1. Applying methood: Every type of UV coating machine: 5000~6500 pieces/hr, 4~7m thickness
  2. Facility : UV lamp 80W/cm1, M-Lamp, Height 5~10cm
  3. UV power : 200~300 mJ/cm
  4. Use it within 24 hours after deluted by water.
  5. Stir evenly before apply.

Package

20Kg, 110Kg plastic drum

Storage

Keep away from high temperature, high humidity and direct sun-light; keep tightly closed while stroing.

Product expiration

sealed, 6 months.

Safety and Notes

(1)This product is non self-ignition, corrosive and explosive. For risk, wear mask and gloves while using and handling, and keep watch to prevent touching and breathing. If skin is contacted, promptly and thoroughly flush skin with plenty of water use soap if available. If irritation persists, seek medical attention. If eye is contacted, rinse eyes immediately with large amounts of water (or 0.9% sterile salt solution)for at least 15 minutes and contact physician as needed.(S26)

(2)Fire point: 102℃ (method: ASTM D92). Fire fighting material: foam or CO₂ extinguisher.