Product Name : Pro-cure WB Varnish
Product No : WV-200
Product Description

Pro-cure WB Varnish is a product has to be applied with R-313 Pro-cure Ink to cause a clear contrast effect on printed matter. Its idea is to coat WV-200 on the printed matter printed the exclusive item R-313 Pro-cure Ink in special patterns by offset printing machine. It is an innovative water-based coating technology shows high gloss, clear contrast effect on printed matter surface.

Product Description

WV-200 Pro-cure WB Varnish is a product has to be applied with R-313 Pro-cure Ink to cause a clear contrast effect on printed matter. Its idea is to coat WV-200 on the printed matter printed the exclusive item R-313 Pro-cure Ink in special patterns by offset printing machine. It is an innovative water-based coating technology shows high gloss, clear contrast effect on printed matter surface.

It is not necessary for WV-200 Pro-cure WB Varnish to further purchase facilities or modify the machines as spot varnishing method. It will not increase any extra cost but only one more procedure. The performance of Pro-cure shows exquisite edge, high contrast, explicit effects and abrasive hand touch that spot varnishing can ever achieve.

Pro-cure is novelty, exquisite, gorgeous and anti-counterfeiting. The key points are Pro-cure not increase the cost, require less coating technology, and act quick processing. It can be applied for shoes box packaging, product packaging and other printed matter. It increases additional values and profits in printing.

WV-200 is a water-based varnish designed special for R-313 Pro-cure Ink. It provides paper with excellent rub resistance, good gloss, anti-blocking and water resistance. WV-200 has not toxic, low evaporation and not pollutes the environment.

Specification

(This information is for reference only. Please refer to product COA of the shipment.)
Appearance / Color Milky white liquid
Major components Acrylic resins
Solid content Above 45%
Viscosity (Ford Cup#4, 25oC) 45 ± 10 sec
PH value 8.0-9.0

Storage

  • Keep away from high temperature, high humidity and direct sun-light.

Packaging

  • 20kgs, 200kgs /plastic drum.

Security considerations

  1. This product is no self-ignition, corrosive and explosive. For risk, wear mask and gloves while using and handling, and keep watch to prevent touching and breathing. If skin is contacted, promptly and thoroughly flush skin with plenty of water use soap if available.
  2. Flash point: >200oC. Blast: none.

1. IDENTIFICATION OF THE SUBSTANCE AND COMPANY INFORMATION

  • Trade Name : Pro-cure WB Varnish
  • Product Code : WV-200
  • Product Class : Acrylic Emulsion
  • Generic Name : Water-Base Paper Coating varnish
  • Manufacturer's name:
    M.CREATE INTERNATIONAL CO., LTD.
    Address: No. 31, Alley 12, Lane 261, Sec 2, Xi Yuan Rd, Taipei, Taiwan, R.O.C.
    Tel : 886-2-2339-2714 / Fax : 886-2-2339-5855
    Http: www.m-create.com.tw / E-mail: more.create@msa.hinet.net

2. HAZARDS IDENTIFICATION

Health Hazards:

  • Inhalation : Irritating to eyes, respiratory system and skin (R36/37/38)
  • Eye Contact : Liquid may cause discomfort in the eye with slight excess redness and possibly swelling of the conjunctiva.
  • Skin contact : Brief contact is not irritating. Prolonged contact, as from clothing wet with the material, may cause mild irritation, experienced as discomfort, and seen as local redness.
  • Skin Absorption : No evidence of harmful effects form available information.
  • Swallowing : No evidence of harmful effects form available information.

3. COMPOSITION

(% Chemical Component by WT.)
  CAS# WT.%
Acrylate monomer 42978-66-5 30~50
Water 7732-18-5 50~60
Ammonia 7664-41-7 1~5

4. FIRST AID MEASURES

Inhalation:

  • Remove to fresh air. Consult physician/medical help if respiratory is not relieved by fresh air.

Eye Contact:

  • Immediately flush eyes with water and continue washing for several minutes. Remove contact lenses, if worn. Obtain medical attention.

Skin Contact:

  • Remove contaminated clothing. Wash skin with soap and water. If irritation persists or if contact has been prolonged, obtain medical attention.

Ingestion:

  • Wash out mouth with water, do not induce vomiting. Consult physician.

5. FIRE FIGHTING MEASURES

Fire point and auto-ignition temperature:

  • Auto-ignition temperature: Not currently available.

Extinguishing media:

  • Non-flammable (aqueous solution): After water evaporates, remaining material will burn. Apply alcohol-type or all-purpose-type foam by manufacturers’ recommended techniques for large fires. Use water spray, carbon dioxide or dry chemical media for small fires.

Fire fighting instruction:

  • No information currently available.

Special Fire Fighting Procedure:

  • No information currently available.

Special Protective Equipment for Firefighters:

  • Use self-contained breathing apparatus when fighting fires in enclosed areas. Hazardous polymerization may occur under fire condition, and toxic fumes may be released.

Unusual Fire and Explosion Hazards

  • Product will not burn but may spatter if temperature exceeds boiling point of water.

6. ACCIDENTAL RELEASE MEASURES

Steps to be taken if Material is Released or Spilled:

  • Small spills can be flushed with large amounts of water: larger spills should be collected for disposal.

Personal Precautions:

  • Wear suitable protective equipment. See Section 8.2-Personal Protection.

Environmental Precautions:

  • Not toxic to fish or plans.

7. HANDLING AND STORAGE

Handling:

  • General Handling
  • Avoid breathing vapor from container opening.
  • Avoid contact with skin and clothing.
  • Keep container closed.
  • Use with adequate ventilation.
  • Wash thoroughly after handling.
  • Ventilation
  • General (mechanical) room ventilation is expected to be satisfactory for use at room temperature.

Storage:

  • Store above 4oC(40℉).Do not freeze.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  • Respiratory Protection : None required if airborne concentrations are maintained  below listed exposure limits. If airborne concentrations exceed listed exposure limits, elect respiratory protection equipment in accordance with OSHA Standard 29 CFR 1910.134. If necessary, use NIOSH approved mist respirator in poorly ventilated areas.
  • Ventilation : General (mechanical) room ventilation is expected to be satisfactory for use at room temperature.
  • Eye Protection : Safety glasses or monogoggles, as appropriate
  • Protective Gloves : Polyvinyl chloride coated.

9. Physical and Chemical Properties

  • Physical State: Liquid
  • Color: Milky White
  • PH: 7~9
  • Decomposition Temp.:>150oC
  • Autoignition Temp. : NA
  • Vapor Pressure: NA
  • Density: 1.0-1.1 (20oC)
  • Form: White Emulsion
  • Odor: Mild Odor
  • Boiling Point/Boiling Range: Approx. 100oC
  • Flash Point&Method Used: NA
  • Explosion Properties: NA
  • Vapor Density: NA (Air=1)
  • Solubility: Miscible In All Proportions

10. STABILITY AND REACTIVITY

Stability:

  • Stable under normal conditions

Conditions to Avoid:

  • Direct sunlight, heat, flames. Contact with acids

11. Toxicological Information

  • Information on analogous products shows minimal toxicity concerns.
  • ACUTE TOXICITY
  • Peroral: Rat LD50>2000 mg/kg

12. DISPOSAL CONSIDERATIONS

Environmental Fate

  • Not toxic to fish or plants, Does not inhibit bacteria in waste treatment facilities. Polymer is not biodegradable., Product is not RCRA hazardous., The following information is based on analogy with a similar material.

BOD (% Oxygen consumption)

  • Day 5   Day 10  Day 15  Day20   Day 30 1.8%

Ecotoxicity

  • oxicity to Micro-organisms: IC50 > 2000 mg/l
  • Toxicity to Aquatic Invertebrates: Daphnia EC50 > 1000 mg/l
  • Toxicity to Fish: Fathead Minnow LC50 > 1000 mg/l

Further Information

  • None

13. ECOLOGICAL INFORMATION

Waste Disposal Method

  • Incinerate in a furnace or otherwise dispose of in accordance with applicable, State and local requirements.
  • Dispose in accordance with all applicable Federal, State, and local environmental regulations. Empty containers should be recycled or disposed of through an approved waste management facility.

Disposal Considerations

  • Does not inhibit bacteria in waste treatment facilities. Polymer is not biodegradable.
  • Product is not RCRA hazardous.
  • Disposal methods identified are for the product as sold. For proper disposal of used material, an assessment must be completed to determine the proper and permissible waste management options permissible under applicable rules, regulations and/or laws governing your location

14. TRANSPORT INFORMATION

U.S.D.O.T
NON-BULK

Proper Shipping Name: NOT REGULATED

BULK

  • Proper Shipping Name: NOT REGUULATED
This information is not intended to convey all specific regulatory or operational requirements/information relating to this product. Additional transportation system information can be obtained through an authorized sales or customer service representative. It is the responsibility of the transporting organization to follow all applicable laws, regulations and rules relating to the transportation of the material.

15. Regulatory Information

  • It is the responsibility of the user to know and comply with all applicable rules, regulations and laws relating to the product being used.

16. OTHER INFORMATION

Prepared by:

  • Company: M.CREATE INTERNATIONAL CO., LTD.
  • Address: No. 31, Alley 12, Lane 261, Sec 2, Xi Yuan Rd, Taipei, Taiwan, R.O.C.
  • Tel: 886-2-2339-2714 Fax: 886-2-2339-5855
  • Name: Hsu Wen-Rong
  • Issue date: 2014/4/22

Notice:

  • Recipients of this Material Safety Data Sheet must make their own assessment of workplace risk as required by other health and safety legislation.

Liability:

  • The information in this MSDS is correct to the best of our knowledge at the date of publication. It is given in good faith but no warranty is implied with respect to the quality and specification of the product.