Product Name : Pro-cure Ink for Paper printing
Product No : R-313
Product Description

Pro-cure Ink for Paper printing is mainly used in printing graphics after drying or curing thoroughly, with offline or online on the design draft.Printing R-313Pro-cure Ink on the non-varnishing part on the plant press, and then print S-200 Pro-cure UV varnish on the fullflat-bed forcuring.In the meantime, S-200 Pro-cure UV Varnish and R-313 Pro-cure Ink make tinyfrostinglamination effect on the register area, in the Pro-cure area it appear the matt effect. The contrastwith matt and gloss effect makes the publication have better performance, it can save working time and cost.

Product Description

R-313 is mainly used in printing graphics after drying or curing thoroughly, with offline or online on the design draft.Printing R-313Pro-cure Ink on the non-varnishing part on the plant press, and then print S-200 Pro-cure UV varnish on the fullflat-bed forcuring.In the meantime, S-200 Pro-cure UV Varnish and R-313 Pro-cure Inkmake tinyfrostinglamination effect on the register area, in the Pro-cure area it appear the matt effect. The contrastwith matt and gloss effect makes the publication have better performance, it can save working time and cost.

Using Pro-cure Ink 313 curing on theplate press, the excellence is accurate on the spot UV, meet the demand of the tiny and complicated. Most of all, the customers do not use the expensive UVequipment and inkbut also raise the value on the publication.

Operation

R-313 can be applied on the plate press, just like gloss printing ink.
  1. R-313 is a common ink for any printing condition.
  2. It can obtain good inkholdout effect, not stripping easy.
  3. R-313 is suitable for various paper and combine the rub-resistancecharacter, in the short time it can be dried.
  4. R-313 is stable on the machine, reduce the paper consumption.
  5. It doesn’t need to dry spraying after printing.

Storage and attention:

  • Keep away from high temperature, high humidity and direct sun-light.
  • Product expiration: 1 year.

Package

1kg/can

1. IDENTIFICATION OF THE SUBSTANCE AND COMPANY INFORMATION

  • Trade Name : Pro-cure Ink
  • Product Code : R-313
  • Product Class : Printing Ink
  • Generic Name : Paper printing
  • Manufacturer's name:
    M.CREATE INTERNATIONAL CO., LTD.
    Address: No. 31, Alley 12, Lane 261, Sec 2, Xi Yuan Rd, Taipei, Taiwan, R.O.C.
    Tel : 886-2-2339-2714 / Fax : 886-2-2339-5855
    Http: www.m-create.com.tw / E-mail: more.create@msa.hinet.net

2. HAZARDS IDENTIFICATION

Health Hazards:

  • Irritating to eyes, respiratory system and skin (R36/37/38)
  • May cause sensitization by skin contact (R43)

Safety Hazards:

  • Viscous clear liquid
  • Causes mild irritation, suitable protective gear is recommended.
  • Avoid UV light and sunlight to prevent self-polymerization.

3. COMPOSITION

(% Chemical Component by WT.)
  CAS# WT.%
Alkyd resin 63148-69-6 40%~60%
Castor oil 8001-79-4 10%~20%
Linseed oil 8001-26-1 10%~20%
Soybean oil 8001-22-7 10%~20%
Distillates 64742-47-8 10%~20%

4. FIRST AID MEASURES

Inhalation:

  • Remove to fresh air. Consult physician/medical help if respiratory is not relieved by fresh air. Give artificial respiration or oxygen if necessary.

Eye Contact:

  • Rinse eyes immediately with large amounts of water for at least 15 minutes and contact physician as needed. (S26)

Skin Contact:

  • Promptly and thoroughly flush skin with plenty of water, use soap if available.
  • Remove contaminated clothing and shoes. If irritation persists, seek medical attention.

Ingestion:

  • Wash out mouth with water, do not induce vomiting. Consult physician.

5. FIRE FIGHTING MEASURES

Extinguishing media:

  • Dry Chemical powder, CO2, foam, sand, Water spray should be used. Never used direct water jet.

Fire fighting instruction:

  • Firemen have to wear full protective clothing with self-contained breathing apparatus to prevent contact with skin and eyes.
  • Evacuate area and fight fire from a safe distance.
  • Hazardous polymerization may occur under fire condition, and toxic fumes may be released.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions:

  • Extinguish naked flames. Remove ignition sources. No smoking. Avoid sparks. Evacuate the area of all non-essential personnel. Shut off leaks, if possible, without personal risk. Avoid contact with skin, eyes, and clothing. Do not breathe vapor, mists or aerosols. Ventilate contaminated area thoroughly. Take precautionary measures against static discharge.

Personal protection:

  • Wear neoprene gloves, PVC chemical resistant suit with integral hood and knee length rubber safety boots. Wear full-face piece respirator with organic vapor canister. In a confined space, wear self-contained breathing apparatus.

Environmental precautions:

  • Prevent contamination of soil and water. Prevent from spreading or entering into drains, ditches or rivers by using sand, earth or other appropriate barriers. Advise relevant authorities if contamination occurs.

Clean up method:

  • Absorb, or contain with sand, earth or similar inert absorbent material.
  • Shovel up and keep in a tightly closed container for disposal.
  • Put leaking containers in a labeled drum.

7. HANDLING AND STORAGE

Handling:

  • Extinguish any naked flames. Remove ignition sources.
  • No smoking. Avoid sparks. Avoid contact with skin, eyes, and clothing. Take precautionary measures against static discharges.
  • Earth all equipment. Do not breathe vapor or mists. Use in well-ventilated areas only.
  • Used local exhaust extraction. Do not empty into drains.

Storage:

  • For containers or container linings use mild or stainless steel or polypropylene. Certain plastics, galvanized iron and copper may discolor the product. Store in a cool, dry, well-ventilated area, away from incompatible materials. Keep away from direct sunlight and other sources of heat or ignition.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  • Exposure Limit : None established.
  • Respiratory Protection : If risk of inhalation, wear half-mask respirator with organic vapor canister and built in particulate filter NPF 20 (gas only).
  • Eye Protection : Closely fitting goggles.
  • Hand Protection : Chemical resistant gloves e.g. neoprene.
  • Other Protective equipment : Wear protective clothing and chemical resistant safety shoes or boots.

9. Physical and Chemical Properties

  • Physical State: Liquid
  • Color: Light yellow brown translucent
  • PH: NA
  • Decomposition Temp.:>250oC
  • Autoignition Temp. : NA
  • Vapor Pressure: Ordinary
  • Density: 1.0-1.2 (25oC)
  • Form: Sticky liquid
  • Odor: Ink smell
  • Boiling Point/Boiling Range: >150oC
  • Flash Point&Method Used: >113oC(closed cup)
  • Explosion Properties: NA
  • Vapor Density: NA (Air=1)
  • Solubility: Insoluble in water

10. STABILITY AND REACTIVITY

Stability:

  • Stable under normal handling conditions.

Conditions to Avoid:

  • Direct sunlight, any other sources of heat or radiation, flames and sparks. Contact with acids or bases.

11. Toxicological Information

  • ORAL RAT LD50
  • PII Value       0

12. DISPOSAL CONSIDERATIONS

Precautions:

  • Refer to section 7 before handling the product or container.

Disposal Methods:

  • Recycle or rework if feasible. Incinerate at authorized facility. Landfill in a facility authorized to receive waste. Normally this product need not be considered as a “special waste“. However, the relevant authority should be contacted to confirm this statement.

13. ECOLOGICAL INFORMATION

  • Unknown

14. TRANSPORT INFORMATION

  • UN No:Not regulated.
  • Transport Information:No any special instructions
  • Packing Group:Not applicable
  • Rall/road transport:GGVS/GGVE:Not available
  • Sea transport:GGV-See/IMDG:Not regulated
  • Air transport:IATA/ICAO:Not available
  • Marine pollutant: Not listed

15. Regulatory Information

R-phrase:

  • Irritating to eyes, respiratory system and skin.(R36/37/38)
  • May cause sensitization by skin contact.(R43)

S-phrase:

  • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.(S26)
  • Do not breathe vapor/mist.(S23)
  • Use only in well ventilated areas.(S51)
  • In case of insufficient ventilation, wear suitable respiratory equipment.(S38)
  • Wear suitable protective clothing, gloves and eye/face protection.(S36/37/38)
  • EINECS: Conforming        TSCA: Conforming

16. OTHER INFORMATION

Prepared by:

  • Company: M.CREATE INTERNATIONAL CO., LTD.
  • Address: No. 31, Alley 12, Lane 261, Sec 2, Xi Yuan Rd, Taipei, Taiwan, R.O.C.
  • Tel: 886-2-2339-2714 Fax: 886-2-2339-5855
  • Name: Hsu Wen-Rong
  • Issue date: 2014/4/22

Notice:

  • Recipients of this Material Safety Data Sheet must make their own assessment of workplace risk as required by other health and safety legislation.

Liability:

  • The information in this MSDS is correct to the best of our knowledge at the date of publication. It is given in good faith but no warranty is implied with respect to the quality and specification of the product.