Product Name : Low-energy UV Varnish
Product No : S-500
Product Description

S-500 Low-energy UV Varnish is an innovative product and low energy flagship UV product of our company. The main characteristic is it is a non-solvent and environment friendly product. With existed varnishing felicities, you can decrease 1/2 lamp numbers and save about 50% electricity. The UV curing power can be decreased from 30MJ/CM to 15MJ/Cm. It saves power and at the same time it is fast and low temperature curing. M.create is the first manufacturer who develop, manufacture and produce low energy UV varnish in the whole world. It has high gloss, low odor, good wetting, nice solvent residence, excellent abrasion residence and other characteristic. S-500 can be applied for magazine cover, paper board, labels, various surfaces of low heat-resistant materials and printing inks.

Description

S-500 Low-energy UV Varnish is an innovative product and low energy flagship UV product of our company. The main characteristic is it is a non-solvent and environment friendly product. With existed varnishing felicities, you can decrease 1/2 lamp numbers and save about 50% electricity. The UV curing power can be decreased from 30MJ/CM to 15MJ/Cm. It saves power and at the same time it is fast and low temperature curing. M.create is the first manufacturer who develop, manufacture and produce low energy UV varnish in the whole world. It has high gloss, low odor, good wetting, nice solvent residence, excellent abrasion residence and other characteristic. S-500 can be applied for magazine cover, paper board, labels, various surfaces of low heat-resistant materials and printing inks.

Specification

Appearance/Color Transparent slightly yellow
Viscosity (Brookfield LVT, 25o C) 330~420 cps
Curing speed 25M/min/Lamp (40W/cm)
Gloss 60∘ 90 ± 5

Safety and Notes

  1. Storage: keep away from high temperature, high humidity and direct sun-light; keep tightly closed while storing.
  2. Product expiration: sealed, 12 months.
  3. This product is non self-ignition, corrosive and explosive. For risk, wear mask and gloves while using and handling, and keep watch to prevent touching and breathing. If skin is contacted, promptly and thoroughly flush skin with plenty of water use soap if available. If irritation persists, seek medical attention. If eye is contacted, rinse eyes immediately with large amounts of water (or 0.9% sterile salt solution)for at least 15 minutes and contact physician as needed.(S26)
  4. Fire point: 102o C (method: ASTM D92). Fire fighting material: foam or CO₂ extinguisher.

Package

20Kg plastic drum, 200Kg iron drum

1. IDENTIFICATION OF THE SUBSTANCE AND COMPANY INFORMATION

  • Trade Name : Low-energy UV Varnish
  • Product Code : S-500
  • Product Class : ACRYLATE RESIN
  • Generic Name : Paper Coating UV Curing Varnish
  • Manufacturer's name:
    M.CREATE INTERNATIONAL CO., LTD.
    Address: No. 31, Alley 12, Lane 261, Sec 2, Xi Yuan Rd, Taipei, Taiwan, R.O.C.
    Tel : 886-2-2339-2714 / Fax : 886-2-2339-5855
    Http: www.m-create.com.tw / E-mail: more.create@msa.hinet.net

2. HAZARDS IDENTIFICATION

Health Hazards:

  • Irritating to eyes, respiratory system and skin (R36/37/38)
    May cause sensitization by skin contact (R43)

Safety Hazards:

  • Viscous clear liquid
  • Causes mild irritation, suitable protective gear is recommended.
  • Avoid UV light and sunlight to prevent self-polymerization.

3. COMPOSITION

(% Chemical Component by WT.)
  CAS# WT.%
Epoxy Acrylate Oligomer 55818-57-0 25~45
TMPTA 15625-89-5 15~30
TPGDA 42978-66-5 22~28
Benzophenone 119-61-9 2~10
Morpholine 110-91-8 4~12

4. FIRST AID MEASURES

Inhalation:

  • Remove to fresh air. Consult physician/medical help if respiratory is not relieved by fresh air. Give artificial respiration or oxygen if necessary.

Eye Contact:

  • Rinse eyes immediately with large amounts of water for at least 15 minutes and contact physician as needed. (S26)

Skin Contact:

  • Promptly and thoroughly flush skin with plenty of water, use soap if available.
  • Remove contaminated clothing and shoes. If irritation persists, seek medical attention.

Ingestion:

  • Wash out mouth with water, do not induce vomiting. Consult physician.

5. FIRE FIGHTING MEASURES

Fire point and auto-ignition temperature:

  • Fire point: 102o C (method: ASTM D92)
  • Auto-ignition temperature: Not Available

Extinguishing media:

  • Dry Chemical powder, CO2, foam, sand, Water spray should be used. Never used direct water jet.

Fire fighting instruction:

  • Firemen have to wear full protective clothing with self-contained breathing apparatus to prevent contact with skin and eyes.
  • Evacuate area and fight fire from a safe distance.
  • Hazardous polymerization may occur under fire condition, and toxic fumes may be released.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions:

  • Extinguish naked flames. Remove ignition sources. No smoking. Avoid sparks. Evacuate the area of all non-essential personnel. Shut off leaks, if possible, without personal risk. Avoid contact with skin, eyes, and clothing. Do not breathe vapor, mists or aerosols. Ventilate contaminated area thoroughly. Take precautionary measures against static discharge.

Personal protection:

  • Wear neoprene gloves, PVC chemical resistant suit with integral hood and knee length rubber safety boots. Wear full-face piece respirator with organic vapor canister. In a confined space, wear self-contained breathing apparatus.

Environmental precautions:

  • Prevent contamination of soil and water. Prevent from spreading or entering into drains, ditches or rivers by using sand, earth or other appropriate barriers. Advise relevant authorities if contamination occurs.

Clean up method:

  • Absorb, or contain with sand, earth or similar inert absorbent material.
  • Shovel up and keep in a tightly closed container for disposal.
  • Put leaking containers in a labeled drum.

7. HANDLING AND STORAGE

Handling:

  • Extinguish any naked flames. Remove ignition sources. No smoking. Avoid sparks. Avoid contact with skin, eyes, and clothing. Take precautionary measures against static discharges. Earth all equipment. Do not breathe vapor or mists. Use in well-ventilated areas only. Used local exhaust extraction. Do not empty into drains.

Storage:

  • For containers or container linings use mild or stainless steel or polypropylene. Certain plastics, galvanized iron and copper may discolor the product. Store in a cool, dry, well-ventilated area, away from incompatible materials. Keep away from direct sunlight and other sources of heat or ignition.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

  • Exposure Limit : None established.
  • Respiratory Protection : If risk of inhalation, wear half-mask respirator with organic vapor canister and built in particulate filter NPF 20 (gas only).
  • Eye Protection : Closely fitting goggles.
  • Hand Protection : Chemical resistant gloves e.g. neoprene.
  • Other Protective equipment : Wear protective clothing and chemical resistant safety shoes or boots.

9. PHYSICAL AND CHEMICAL PROPERTIES

  • Physical State: Clear Liquid
  • Color: Colorless
  • PH: ND
  • Decomposition Temp.:>150o C
  • Autoignition Temp. : NA
  • Vapor Pressure: NA
  • Density: 1.0-1.1/25o C
  • Form: Transparent Solution
  • Odor: Mild Odor
  • Boiling Point/Boiling Range: NA
  • Flash Point&Method Used: 200o F(open cup)
  • Explosion Properties: NA
  • Vapor Density: NA (Air=1)
  • Solubility: Insoluble in water

10. STABILITY AND REACTIVITY

Stability:

  • Stable under normal handling conditions.

Conditions to Avoid:

  • Direct sunlight, any other sources of heat or radiation, flames and sparks. Contact with acids or bases.

11. TOXICOLOGICAL INFORMATION

  • ORAL RAT LD50 > 7800 mg/kg
  • PII Value 0

12. DISPOSAL CONSIDERATIONS

Precautions:

  • Refer to section 7 before handling the product or container.

Disposal Methods:

  • Recycle or rework if feasible. Incinerate at authorized facility. Landfill in a facility authorized to receive waste. Normally this product need not be considered as a “special waste“. However, the relevant authority should be contacted to confirm this statement.

13. ECOLOGICAL INFORMATION

  • Unknown

14. TRANSPORT INFORMATION

  • UN No : Not regulated.
  • Transport Information : No any special instructions
  • Packing Group : Not applicable
  • Rall/road transport : GGVS/GGVE : Not available
  • Sea transport : GGV-See/IMDG : Not regulated
  • Air transport : IATA/ICAO : Not available
  • Marine pollutant: Not listed

15. REGULATORY INFORMATION

R-phrase:

  • Irritating to eyes, respiratory system and skin.(R36/37/38)
  • May cause sensitization by skin contact.(R43)

S-phrase:

  • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.(S26)
  • Do not breathe vapor/mist.(S23)
  • Use only in well ventilated areas.(S51)
  • In case of insufficient ventilation, wear suitable respiratory equipment.(S38)
  • Wear suitable protective clothing, gloves and eye/face protection.(S36/37/38)
  • EINECS: Conforming TSCA: Conforming

16. OTHER INFORMATION

Prepared by:

  • Company: M.CREATE INTERNATIONAL CO., LTD.
  • Address: No. 31, Alley 12, Lane 261, Sec 2, Xi Yuan Rd, Taipei, Taiwan, R.O.C.
  • Tel: 886-2-2339-2714 Fax: 886-2-2339-5855
  • Name: Hsu Wen-Rong
  • Issue date: 2015/6/5

Notice:

  • Recipients of this Material Safety Data Sheet must make their own assessment of workplace risk as required by other health and safety legislation.

Liability:

  • The information in this MSDS is correct to the best of our knowledge at the date of publication. It is given in good faith but no warranty is implied with respect to the quality and specification of the product.